Common types of half-welded plate heat exchangers include:
Publication Time:
2021/09/15 00:00
Common types of brazed plate heat exchangers include: 1. Single-section brazed plate heat exchanger: Composed of a single plate, used for small-capacity heat exchange. 2. Multi-section brazed plate heat exchanger: Several plates are welded together, used for large-capacity heat exchange. 3. Flat plate brazed plate heat exchanger: The welded plates are flat, making them easy to clean. 4. Corrugated plate brazed plate heat exchanger: The welded plates are corrugated, increasing the heat transfer area. 5. Spiral brazed plate heat exchanger: The welded plates are spiral-shaped, with the fluid flowing in a rotating manner. 6. Vertical brazed plate heat exchanger: The fluid flows vertically from top to bottom. 7. Horizontal brazed plate heat exchanger: The fluid flows horizontally from both ends. 8. Brazed plate heat exchanger with compensation plates: Increases heat exchange efficiency. 9. Brazed plate heat exchanger with special materials: Such as titanium plates and nickel plates. 10. New complex flow channel brazed plate heat exchangers optimized by computer. Selecting the appropriate type of brazed plate heat exchanger based on actual needs can improve heat exchange efficiency.
View More...
Disclaimer: The content is forwarded from the Internet. This website does not own it and does not bear any legal responsibility. If you find any suspected plagiarism on this website, please go to Contact Us to report it and provide relevant evidence. Once verified, this site will immediately delete the suspected infringing content.
Recommended
Contact Information
Telephone
Address
No. 90, Changshou Chang Le Road, Zhouzhuang Town, Jiangyin City, Jiangsu Province
Scan QR Code
Open Mobile Website