Cloud Information-Jianhang Chuanre

Publication Time:

2023/03/06 21:16

Using a new car as collateral, if the car is involved in a traffic accident or is stolen, the bank will not accept the loan application from the mortgage auto loan institution. This includes mortgage vehicle documents for construction and decoration loans, business vehicle mortgage business loans, mortgage transport vehicle living expense loans (with certificate but not the car), and SUV mortgage for construction and decoration loans. These car mortgage loans, which require the original title and GPS installation, are costly, and banks generally do not accept such mortgage auto institution construction and decoration loans, mortgage of owned vehicles for business loans, mortgage of mortgaged cars for living expenses, and car mortgage living expense loans (with certificate only).

How much do you know?

Publication Time:

2023/02/27 21:14

Regarding intake manifolds, a front-mounted intercooler with a longer flow distance will be inferior to a top-mounted intercooler. If the volume of its radiator increases and/or the internal tubes become more numerous and thinner, it will be even more disadvantageous due to increased pressure loss. Of course, the thickness and number of bends of its tubes are also important. Overly thick and non-straight tubes will naturally have slower flow rates. This mainly depends on the size of the turbocharger. The airflow, after being turbocharged, flows forward from the lower pair of tubes (red caps) and passes through the intercooler in the side box, then enters the pressure chamber from the upper pair of tubes (red caps). Blue circle

A brief introduction to chillers for you

Publication Time:

2023/02/20 21:34

Compared to the previous few seasons, the RE22 can be considered a revolutionary design. At least from the perspective of the turbo layout and intake system, there is basically no trace of last season's design. For example, the previous Renault hybrid engine used an air-cooled intercooler. After being pressurized by the intake turbocharger, the airflow would be split and flow to the intercoolers in the side boxes on both sides, and then enter a similar pressure chamber from the intake ports on both sides. The turbocharging system has an unavoidable topic, which is the intercooler. It determines the density of the air in the engine intake manifold, and thus determines the power of the engine.

Things to know about intercoolers

Publication Time:

2023/02/13 21:37

After heat exchange with air in the oxygen cold accumulator, it becomes finished oxygen. The pure nitrogen coming out from the top of the rectification tower, after passing through the air precooler, is then heated to room temperature by the air in the nitrogen cold accumulator, thus becoming the finished product for export. The finished oxygen enters the gas holder, and after compression, it is filled into oxygen cylinders or directly sent to oxygen users. According to publicly available information, it is an automobile air conditioning and radiator manufacturer, whose main products include: automobile air conditioning systems, front-end module assemblies; parallel flow evaporators, cascade evaporators; parallel flow condensers, subcooled condensers; heater cores, automobile radiators, intercoolers,

Things to know about the economizer

Publication Time:

2023/02/06 22:03

With the confluence of a once-in-a-century global shift and a once-in-a-century pandemic, China's economic development trajectory has drawn significant attention. What is the outlook for China's macroeconomic situation? How will China's economy fare in the second half of the year? These are pressing concerns. The weakness in domestic demand stems from both short-term shocks such as repeated outbreaks and long-term factors such as economic structural transformation, necessitating accelerated efforts to promote a new type of urbanization centered on people. Market expectations are...

What are the characteristics of an economizer?

Publication Time:

2023/01/30 21:31

在后续经济总基调部分，会议强调，。坚持稳中求进，坚持疫情要防住、经济要稳住、发展要三大核心，便是下半年经济的总基调与总要求。新冠肺炎疫情和俄乌冲突导致风险挑战增多，我国经济发展环境的复杂性、严峻性、不确定性上升。。调控政策既要把握好节奏、时机与度，更要立足当下，谋篇未来，进一步深化改革、扩大开放，巩固提升我国经济在供应链、产业链等方面的国际竞争优势。应充分乡

Some advantages of the economizer

Publication Time:

2023/01/23 20:58

In order to accelerate the implementation of policies and create space for market development, we cannot afford to wait or slow down. We must increase the intensity of policy implementation and accelerate its effectiveness. While ensuring effective epidemic prevention and control, we must focus on economic development, minimize the losses and impact of the epidemic on the economy, and quickly recover and make up for the economic losses caused by the epidemic. We must effectively combine general and structural policies, coordinate incremental and stock policies, coordinate short-term and long-term policies, and ensure that development and response are mutually reinforcing. We must ensure that the economy operates within a reasonable range and promote steady and healthy economic and social development.

What are some alternative uses for water-cooled plates?

Publication Time:

2023/01/16 04:39

For CTP, there used to be profiles, using friction stir welding. The original cold plate was placed on the lower casing, with the module on top. The large flat bottom plane used to be as long as the casing, with a flat aluminum plate on the top and the bottom plate stamped with flow channels. The two plates were spot welded together to form a closed flow channel. When installing from top to bottom, the cold plate has a bottom. The extruded cold plate is connected by FDS screws, achieving mechanical connection and sealing, forming a non-detachable integrated lower casing. FDS is a patented product, and only two companies in the world have patents. Under the battery...

What are some alternative uses for water-cooled plates?

Publication Time:

2023/01/16 04:39

For CTP, there used to be profiles, using friction stir welding. The original cold plate was placed on the lower casing, with the module on top. The large flat bottom plane used to be as long as the casing, with a flat aluminum plate on the top and the bottom plate stamped with flow channels. The two plates were spot welded together to form a closed flow channel. When installing from top to bottom, the cold plate has a bottom. The extruded cold plate is connected by FDS screws, achieving mechanical connection and sealing, forming a non-detachable integrated lower casing. FDS is a patented product, and only two companies in the world have patents. Under the battery...

What are the characteristics of water cooling plate replacement?

Publication Time:

2023/01/09 21:19

This utility model relates to the field of battery technology and discloses a water-cooled battery module, battery pack, and power-using device. It includes a battery module body, wherein the battery module body is provided with a receiving cavity for installing the battery module. The battery module body includes at least two side water-cooling plates and one bottom water-cooling plate. At least two of the side water-cooling plates are connected in sequence to form the inner wall of the receiving cavity. At least two of the side water-cooling plates are installed on the bottom water-cooling plate. The bottom water-cooling plate is used to form the bottom of the receiving cavity. The side water-cooling plates and ...

Professional manufacturer of plate heat exchangers and other energy-efficient and environmentally friendly products

Blog